APC Smart 3000 USB/Serial RM 2U Power Protection

Availability

Boost and Trim Automatic Voltage Regulation (AVR)

Gives higher application availability by correcting low and high voltage conditions without using the battery.

Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Power conditioning

Protects connected loads from surges, spikes, lightning, and other power disturbances.

Temperature-compensated battery charging

Prolongs battery life by regulating the charge voltage according to battery temperature.

Automatic restart of loads after UPS shutdown

Automatically starts up the connected equipment upon the return of utility power.

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Disconnected battery notification

Warns when a battery is not available to provide backup power.

Manageability

Network manageable

Provides remote management of the UPS over the network.

Audible alarms

Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.

LED status indicators

Quickly understand unit and power status with visual indicators.

Serial Connectivity

Provides management of the UPS via a serial port.

USB connectivity

Provides management of the UPS via a USB port (not available on all models).

Disconnected battery notification

Warns when a battery is not available to provide backup power.

Serviceability

User-replaceable batteries

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Hot-swappable batteries

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Predictive failure notification

Provides early-warning fault analysis ensuring proactive component replacement.

Resettable circuit breakers

Enables a quick recovery from overload events.

Battery failure notification

Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Adaptability

Adjustable voltage-transfer points

Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Adjustable voltage sensitivity

Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Safety

Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Output

Output Power Capacity

2700 Watts / 3000 VA

Max Configurable Power

2700 Watts / 3000 VA

Nominal Output Voltage

120V

Output Voltage Distortion

Less than 5% at full load

Output Frequency (sync to mains)

47 - 53 Hz for 50 Hz nominal,57 - 63 Hz for 60 Hz nominal

Waveform Type

Sine wave

Output Connections

(6) NEMA 5-15R
(2) NEMA 5-20R

Input

Nominal Input Voltage

120V

Input Frequency

50/60 Hz +/- 3 Hz (auto sensing)

Input Connections

NEMA L5-30P

Cord Length

8 feet (2.44 meters)

Input voltage range for main operations

82 - 144V

Input voltage adjustable range for mains operation

75 - 154V

Batteries & Runtime

Battery Type

Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

Typical recharge time

3 hour(s)

Replacement Battery

RBC43

RBC™ Quantity

Energy Use/Efficiency

Load	Efficiency
25%	92.1%
50%	95.2%
75%	95.8%
100%	95.6%

Hover over the line on the graph above to view the efficiency at any desired load

Curve fit to measured efficiency data. All measurements taken in normal operating mode, at typical environmental conditions, with nominal electrical input and balanced resistive load (PF = 1.0) output.

Communications & Management

Interface Port(s)

DB-9 RS-232,SmartSlot,USB

Available SmartSlot™ Interface Quantity

Control panel

LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : and Overload Indicators

Audible Alarm

Alarm when on battery : distinctive low battery alarm : configurable delays

Emergency Power Off (EPO)

Yes

Surge Protection and Filtering

Surge energy rating

480 Joules

Filtering

Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

Physical

Maximum Height

3.50 inches (89 mm)

Maximum Width

19.00 inches (483 mm)

Maximum Depth

26.00 inches (660 mm)

Rack Height

Net Weight

96.00 lbs. (43.64 kg)

Shipping Weight

125.00 lbs. (56.82 kg)

Shipping Height

10.00 inches (254 mm)

Shipping Width

24.50 inches (622 mm)

Shipping Depth

38.60 inches (980 mm)

Color

Black

Units per Pallet

8.00

Environmental

Operating Environment

32 - 104 °F (0 - 40 °C)

Operating Relative Humidity

0 - 95%

Operating Elevation

0-10000 feet (0-3000 meters)

Storage Temperature

5 - 113 °F (-15 - 45 °C)

Storage Relative Humidity

0 - 95%

Storage Elevation

0-50000 feet (0-15000 meters)

Audible noise at 1 meter from surface of unit

47.00 dBA

Online Thermal Dissipation

400.00 BTU/hr

Protection Class

Conformance

Regulatory Approvals

BSMI,CSA,UL 1449,UL 1778,FCC Part 15 Class A

Standard Warranty

2 years repair or replace,optional on-site warranties available,optional extended warranties available

Equipment protection policy

Lifetime : $150000

Environmental Compliance

China RoHS,REACH: Contains No SVHCs

**The time to recharge to 90% of full battery capacity following a discharge to shutdown using a load rated for 1/2 the full load rating of the UPS.

$9,428.00 incl. tax
SKU:	SA3000APCRS2U
Availability:	In Stock
Quantity:	3 pcs
Qty:
Add To Compare \| Add To Wishlist